Wire between J623 and N145
Net n79555114 · one diagram
- Function
- N145 Right Electro-Hydraulic Engine Mount Solenoid Valve — line to J623 Engine Control Module T60/10endpoints onlyBasis: named after the two parts it connects
- Wire
li/ge- Models
- B7 only · 3.2 FSI
- Drawn in
- 1 diagram, 1 stretch
- Checked
- Not checked by hand. Extracted from the manual automatically.
What is on this wire
Parts (2)
Where these parts are
| Part | Location |
|---|---|
J623 | Under the plenum chamber covermanual text p. 1204 |
N145 | On the right engine mountmanual text p. 1224 |
Drawing
Wires are li/ge (lilac/yellow) unless a colour is written on them. 2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
95 · 3.2L - FSI - Injection Engine (188 kW - Motronic - 6 Cylinder) engine codes AUK, BKH B7 · 1 stretch
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.