Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Sensor ground

Net n69cb1e34 · joined across diagrams

Function
Sensor groundstated
Basis: ground connection 410
Wire
brswbr/ro
Models
B7 only
Drawn in
2 diagrams, 6 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams2 guessed components

What is on this wire

Parts (2)

  • G283pin 2guessDriver's Front Airbag Crash Sensor
  • J234pin 46Airbag Control Module

Grounds (1)

  • 410Sensor Ground Connection 1 (in main wiring harness)

Inline connectors (2)

  • T17apin 517-Pin Connector, red, connector station A-pillar, left
  • T17apin 617-Pin Connector, red, connector station A-pillar, left

Where these parts are

PartLocation
G283Wired into the main wiring harnessinferred from wiring
J234Below centre console, in front of handbrake levermanual text p. 1125
410Splice inside the main wiring harnesssheet legend
T17aOn lower left A-pillar, behind trimmanual text p. 1100 p. 1101

Drawing

Wires are br (brown) unless a colour is written on them. 10 parts and points, 10 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

  • guess: the component label is not right at the symbol; the part was assigned by position.
54 · Airbags and Safety Belt Tensioners B7 · 3 stretches

Diagram 54 page · joined to other diagrams at J234/46

Page 412manual · Driver and Front Passenger Front Airbag Crash Sensors, Instrument Cluster Control Module

TrackWireFromToNotes
99br 0.35 mm²J234 46ground 410
100sw 0.35 mm²jointground 410
via T17a/6
101br 0.35 mm²G283 2guessground 410
via T17a/5
105 · Airbags and Safety Belt Tensioners B7 · 3 stretches

Diagram 105 page · joined to other diagrams at J234/46

Page 640manual · Front Airbag Crash Sensor, Instrument Cluster Control Module

TrackWireFromToNotes
99br 0.35 mm²J234 46ground 410
100sw 0.35 mm²jointground 410
via T17a/6
101br → br/ro 0.35 mm²G283 2guessground 410
via T17a/5
marked **

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.