Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between J220 and J293 (+2)

Net n5e84711f · joined across diagrams

Function
J293 Coolant FC Control Module ↔ J220 104endpoints only
Basis: named after the two parts it connects
Wire
ro/ws
Models
B6 only · 3.0 V6
Drawn in
2 diagrams, 2 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams2 guessed components

What is on this wire

Parts (2)

  • J220pin 104Motronic Engine Control Module (ECM)
  • J293pin 3guessCoolant FC (Fan Control) Control Module

Inline connectors (2)

  • T10dpin 510-Pin Connector, grey, connector station A-pillar, left
  • T17dpin 1117-Pin Connector, red, connector station E-box, plenum chamber

Where these parts are

PartLocation
J220In electronics box, plenum chambermanual text p. 1122
J293On front end, at radiator fanmanual text p. 1123
T10dOn lower left A-pillar, behind trimmanual text p. 1100 p. 1101
T17dIn electronics box, plenum chambermanual text p. 1101 p. 1102

Drawing

Wires are ro/ws (red/white) unless a colour is written on them. 6 parts and points, 6 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

  • guess: the component label is not right at the symbol; the part was assigned by position.
9 · 3.0 l - Injection Engine (162 kW - Motronic - 6 Cylinder) engine code AVK, BGN B6 · 1 stretch

Diagram 9 page · joined to other diagrams at J220/104

Page 102manual · Motronic Engine Control Module, Mass Air Flow (MAF) Sensor, Evaporative Emission (EVAP) Canister Purge Regulator Valve, Secondary Air Injection (AIR) Solenoid

TrackWireFromToNotes
68ro/ws 0.35 / 0.5 mm²J293 3guessJ220 104
303 · 3.0 l - Injection Engine (162 kW - Motronic - 6 Cylinder) engine code AVK B6 · 1 stretch

Diagram 303 page · joined to other diagrams at J220/104

Page 869manual · Motronic Engine Control Module, Mass Air Flow (MAF) Sensor, Evaporative Emission (EVAP) Canister Purge Regulator Valve, Secondary Air Injection (AIR) Solenoid

TrackWireFromToNotes
68ro/ws 0.35 / 0.5 mm²J293 3guessJ220 104

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.