Fused supply from S12 (10 A, terminal 30)
Net n45dea9d5-437.18 · joined across diagrams
- Function
- Fused supply from S12 (10 A, terminal 30)derivedBasis: net hangs on the output side of S12
- Wire
ro/sw- Models
- B7 only
- Drawn in
- 3 diagrams, 5 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
2 joins between diagrams3 unresolved ends
What is on this wire
Supply (1)
Fuses, the battery, alternator, ignition switch, and pins marked with a supply terminal (30, 15, 75, X, 50, 87).
S12pin12aFuse in fuse holder/relay panel
Where these parts are
| Part | Location |
|---|---|
S12 | Fuse panel at the left end of the instrument panel, fuse No. 12manual text p. 1114 p. 1118 |
Drawing
Wires are ro/sw (red/black) unless a colour is written on them. 4 parts and points, 3 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet. "→ track" is a reference box: the wire continues on that track, at the stretch its page link points to.
61 · Data Link Connector (DLC) B7 · 1 stretch
Diagram 61 page · joined to other diagrams at S12/12a
62 · Standard Equipment B7 · 2 stretches
Diagram 62 page · joined to other diagrams at S12/12a
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.