Feed to fuse S42 (40/60 A, Coolant Fan Fuse)
Net n4501fff9-531.14 · one diagram
- Function
- Feed to fuse S42 (40/60 A, Coolant Fan Fuse)derivedBasis: net ends on the input side of the fuse
- Wire
ro/bl- Models
- B7 only · 2.0 TFSI, 3.2 FSI
- Drawn in
- 1 diagram, 1 stretch
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 guessed component
What is on this wire
Supply (1)
Fuses, the battery, alternator, ignition switch, and pins marked with a supply terminal (30, 15, 75, X, 50, 87).
S42pin2guessCoolant Fan Fuse
Parts (1)
J293pin4Coolant FC (Fan Control) Control Module
Where these parts are
| Part | Location |
|---|---|
J293 | On front end, at radiator fanmanual text p. 1123 |
S42 | Relay carrier (4-position) with threaded connection, through 2005 MY, position G (black socket) — Behind instrument panel, driver`s sidemanual text p. 1106 |
Drawing
Wires are ro/bl (red/blue) unless a colour is written on them. 2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- guess: the component label is not right at the symbol; the part was assigned by position.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.