Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between J798 and N209 (+1)

Net n3e8f3719 · joined across diagrams

Function
Shared line: J798, N209, N210endpoints only
Basis: 3 parts on this net, no function stated
Wire
ge
Models
B7 only
Drawn in
1 diagram, 4 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams

What is on this wire

Parts (3)

  • J798pin 10Solenoid Relay 4
  • N209pin 2Driver's Lumbar Support Valve BLock
  • N210pin 2Front Passenger's Lumbar Support Valve Block

Where these parts are

PartLocation
J798Wired into the power seat wiring harnessinferred from wiring
N209In the driver's doorinferred from name
N210In the front passenger's doorinferred from name

Drawing

Wires are ge (yellow) unless a colour is written on them. 3 parts and points, 2 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet. "→ track" is a reference box: the wire continues on that track, at the stretch its page link points to.

116 · Power seats with lumbar support and electrically seat heating B7 · 4 stretches

Diagram 116 page · joined to other diagrams at J798/10

Page 730manual · Driver's Seat Lumbar Support Adjustment Switch, Driver's Seat Bolster Inflation Adjustment Button, Driver's Backrest Bolster Inflation Adjustment Button

TrackWireFromToNotes
41ge 0.5 mm²J798 10→ track 54 (p. 731)

Page 731manual · Driver's Lumbar Support Pressure Switch, Driver's Lumbar Support Valve BLock

TrackWireFromToNotes
54ge 0.5 mm²→ track 41 (p. 730)N209 2

Page 732manual · Front Passenger's Seat Adjustment Control Module, Front Passenger's Lumbar Support Pressure Switch

TrackWireFromToNotes
62ge 0.5 mm²→ track 83 (p. 733)N210 2

Page 733manual · Front Passenger's Seat Lumbar Support Adjustment Switch, Front Passenger's Seat Bolster Inflation Adjustment Button

TrackWireFromToNotes
83ge 0.5 mm²J798 10→ track 62 (p. 732)

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.