Wire between E43 and J386
Net n3d660ab2-489.16 · joined across diagrams
- Function
- E43 Mirror Adjustment Switch — line to J386 Driver's Door Control Module T32c/7endpoints onlyBasis: named after the two parts it connects
- Wire
bl/sw- Models
- B7 only
- Drawn in
- 4 diagrams, 4 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
3 joins between diagrams
What is on this wire
Parts (2)
Where these parts are
| Part | Location |
|---|---|
E43 | Driver's door trim, mirror switchinferred from name |
J386 | Integrated in electric window motormanual text p. 1167 |
Drawing
Wires are bl/sw (blue/black) unless a colour is written on them. 2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
67 · Comfort system B7 · 1 stretch
Diagram 67 page · joined to other diagrams at E43/3
98 · Power Driver's Seat and Power Mirrors (with memory) B7 · 1 stretch
Diagram 98 page · joined to other diagrams at E43/3
106 · Power Driver's Seat and Power Mirrors (with memory) B7 · 1 stretch
Diagram 106 page · joined to other diagrams at E43/3
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.