Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between F34 and J285 (+1)

Net n30189702 · joined across diagrams

Function
F34 Brake Fluid Level Warning Switch — line to J285 Control module with indicator unit in instrument panel insert T32a/9endpoints only
Basis: named after the two parts it connects
Wire
ge/bl
Models
B6 only
Drawn in
5 diagrams, 5 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

4 joins between diagrams

What is on this wire

Parts (2)

  • F34pin 1Brake Fluid Level Warning Switch
  • J285pin T32a/9Control module with indicator unit in instrument panel insert

Inline connectors (1)

  • T10cpin 1010-Pin Connector, violet, connector station A-pillar, left

Where these parts are

PartLocation
F34Wired into the wiring harnessinferred from wiring
J285Behind display unitmanual text p. 1125
T10cOn lower left A-pillar, behind trimmanual text p. 1100 p. 1101

Drawing

Wires are ge/bl (yellow/blue) unless a colour is written on them. 7 parts and points, 10 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

3 · Basic Equipment Lowline B6 · 1 stretch

Diagram 3 page · joined to other diagrams at J285/T32a/9

Page 23manual · Control module with indicator unit in instrument panel insert, Oil Pressure Switch, Brake Fluid Level Warning Switch

TrackWireFromToNotes
242ge/bl 0.35 / 0.5 mm²J285 T32a/9F34 1
4 · Basic Equipment Highline B6 · 1 stretch

Diagram 4 page · joined to other diagrams at J285/T32a/9

Page 49manual · Control module with indicator unit in instrument panel insert, Oil Pressure Switch, Brake Fluid Level Warning Switch

TrackWireFromToNotes
242ge/bl 0.35 / 0.5 mm²J285 T32a/9F34 1
18 · Basic Equipment Lowline B6 · 1 stretch

Diagram 18 page · joined to other diagrams at J285/T32a/9

Page 192manual · Control module with indicator unit in instrument panel insert, Oil Pressure Switch, Brake Fluid Level Warning Switch

TrackWireFromToNotes
242ge/bl 0.35 / 0.5 mm²J285 T32a/9F34 1
19 · Basic Equipment Highline B6 · 1 stretch

Diagram 19 page · joined to other diagrams at J285/T32a/9

Page 218manual · Control module with indicator unit in instrument panel insert, Oil Pressure Switch, Brake Fluid Level Warning Switch

TrackWireFromToNotes
242ge/bl 0.35 / 0.5 mm²J285 T32a/9F34 1
302 · Basic Equipment Highline B6 · 1 stretch

Diagram 302 page · joined to other diagrams at J285/T32a/9

Page 856manual · Control module with indicator unit in instrument panel insert, Oil Pressure Switch, Brake Fluid Level Warning Switch

TrackWireFromToNotes
242ge/bl 0.35 / 0.5 mm²J285 T32a/9F34 1

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.