Wire between N291 and P
Net n1f9733e5-110.12 · one diagram
- Function
- N291 Ignition Coil 3 with Power Output Stage ↔ P Pendpoints onlyBasis: named after the two parts it connects
- Wire
- no colour printed
- Models
- B6 only · 3.0 V6
- Drawn in
- 1 diagram, 1 stretch
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 stretch to check1 guessed component
What is on this wire
Parts (2)
Where these parts are
| Part | Location |
|---|---|
N291 | On the engine, at the cylinder headinferred from name |
P | On the engine, at the cylinder headinferred from name |
Drawing
2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- guess: the component label is not right at the symbol; the part was assigned by position.
- check: the extraction marked the stretch for a look at the sheet.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.