Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

V45 · Driver's Backrest Adjustment Motor

Name
Driver's Backrest Adjustment Motor
Type
motor
Models
B6 and B7
Diagrams
7

Location

In or under the driver's seatinferred from name

Other location statements (1)
  • Its wires run through T8h (On driver seat, seat backrest)inferred from wiring

Area: Seats

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Switches

PinWireFunctionConnects toModelsSheets
1
br/ge 1.0 mm²
not statedJ136/9, E96/10/7B6 and B7273 588 593 644 +3
2
ro/ge 1.0 mm²
not statedJ136/6, E96/10/5B6 and B7273 588 593 644 +3

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.