Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

V · Windshield Wiper Motor

Name
Windshield Wiper Motor
Type
motor
Models
B6 and B7
Diagrams
7

Location

Plenum chamber, below the windshieldinferred from name

Other location statements (2)
  • Wired into the wiring harnessinferred from wiring
  • Its wires run through T10c (Connector station - left A-pillar)inferred from wiring

Area: Plenum chamber / firewall

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links & Motors/actuators

PinWireFunctionConnects toModelsSheets
1
bl/li 0.5 mm²
not statedJ519/2, V12/2B6 only11
2
or 0.5 mm²
sw/li
not statedJ519/1, V5/3B6 only11
1/53b
gn/ge 1.5 mm²
Wiper motor, second speed (terminal 53b)derived
J519/3, J519/9B6 and B711 37 180 206 +3
2/53
sw/ws 1.5 mm²
Wiper motor (terminal 53)derived
J519/4, J519/8B6 and B711 37 180 206 +3
3/53e
gn/li 0.35 mm²
Wiper park / brake winding (terminal 53e)derived
J519/11B6 and B711 37 180 206 +3
4/31
br 1.5 mm²
Ground (terminal 31)stated
via 261
B6 and B711 37 180 206 +3

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.