Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

S283 · Brake Vacuum Pump Fuse

Name
Brake Vacuum Pump Fuse
Type
fuse
Models
B7 only
Diagrams
2

Location

Relay carrier E-Box, engine codes BNS from 2006 MY, position E (red socket) — In electronics box (E-box), plenum chambermanual text Manual pages 1111 · engine codes BNS from 2006 MY

Other location statements (1)
  • Wired into the engine compartment wiring harnessinferred from wiring

Area: Electronics box (plenum chamber)

  • 15 A — Brake Vacuum Pump Fuse (engine codes BNS from 2006 MY)

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Motors/actuators & Power

PinWireFunctionConnects toModelsSheets
1
ro 1.5 mm²
Battery positive, permanent (terminal 30)derived
D/3/30, D/7/30, J271/1/30, J271/4/86, J623/92, J757/1/30, S14/12, S88, J624/92, S130/1
via A32, A57, D50, D75
B7 only604 801
2
ro/bl 1.5 mm²
J569 Brake Booster Relay: relay coil (86) to S283 Brake Vacuum Pump Fusederived
J569/1/86, J569/3/30
via D111
B7 only604 801

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.