R99 · Chip Card Reader
- Name
- Chip Card Reader
- Type
- radio / antenna
- Models
- B6 only
- Diagrams
- 2
Location
Wired into the instrument panel wiring harnessinferred from wiring · 4 of 4 named splices on its wires
Other location statements (1)
- Its wires run through T12d (Near glove Compartment)inferred from wiring
Area: Instrument panel
Articles
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely CAN bus & Module links
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
3 | or/li 0.35 mm² | Infotainment CAN Highstated | J285/20, J402/8, J507/9, J526/38, J526/9, R/7, R94/3, J401/9, J412/17, J401/2via A178 | B6 only | 266 1070 |
4 | or 0.35 mm²or/br | Infotainment CAN Lowstated | J285/19, J401/10, J402/9, J412/18, J507/8, J526/30, J526/39, R/12, R94/2via A179 | B6 only | 266 |
4 | or/br 0.35 mm² | Infotainment CAN Lowstated | J285/19, J401/5, J402/9, J507/8, J526/30, J526/39, R/12, R94/2via A179 | B6 only | 1070 |
Diagrams
- 30 · CAN-Bus wiring B6 · From 2004 m. y.
- 331 · CAN-Bus wiring B6 · From 2002 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.