Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

M32 · Right High Beam Headlight

Name
Right High Beam Headlight
Type
lamp
Models
B6 and B7
Diagrams
11

Location

Front right, in or at the right headlight / bumperinferred from name

Other location statements (2)
  • Wired into the right headlight wiring harnessinferred from wiring
  • Its wires run through T17c (Connector station - right A-pillar)inferred from wiring

Area: Front end

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Lighting & Module links

PinWireFunctionConnects toModelsSheets
4
gr/ge 0.5 mm²
not statedJ431/1B6 only515 1046
1/56a
ws/ge 1.0 mm²
High beam (terminal 56a), rightstated
J519/16
via E116
B6 only14 40 183 209 +4
5/31
br 2.5 mm²
Ground (terminal 31) at 43 (On right lower A-pillar)stated
via 176
B7 only447
5/56b
ge/ws 1.5 mm²
Load-reduction positive (terminal 75x, off while cranking), fused by S21 (15 A)derived
J519/22, S20/20a, J431/17, M31/2/56b
via B167
B6 only362 515 847 1046
8/31
br 2.5 mm²
Ground (terminal 31) at 43 (On right lower A-pillar)stated
via 176
B6 only14 40 183 209 +4
8/56a
ws/ge 1.0 mm²
High beam (terminal 56a)derived
J519/16B7 only447 503 665

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.