Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

M25 · High-mount Brake Light

Name
High-mount Brake Light
Type
lamp
Models
B6 and B7
Diagrams
9

Location

Rear, high-mount brake light (rear window / rear lid)inferred from name

Other location statements (2)
  • Wired into the rear wiring harnessinferred from wiring
  • Its wires run through T6i (Behind side trim, rear left)inferred from wiring

Area: Luggage compartment / rear

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Lighting & Ground

PinWireFunctionConnects toModelsSheets
1/54
ro/sw 0.35 mm²
sw/ro
Brake lights (terminal 54)stated
Brake lights (terminal 54)derived
F/4/54, M10/2/54R, M9/6/54L, J519/8, M10/1/54R, M9/3/54L, J519/14
via A18
B6 and B715 184 395 939 +1
1/54
sw/ro 0.35 mm²
Brake lights (terminal 54)stated
Brake lights (terminal 54)derived
J519/14, J519/8B6 and B741 210 448 666 +1
2/31
br 0.35 mm²
Ground (terminal 31) at 50 (In luggage compartment, left), 52 (In rear lid, left)stated
Ground (terminal 31) at 52 (In rear lid, left), 50 (In luggage compartment, left)stated
via 86, 218
B6 and B715 41 184 210 +6

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.