Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J262 · Rear Window Shade Control Module

Name
Rear Window Shade Control Module
Type
control module / relay
Models
B6 and B7
Diagrams
2

Location

Parcel shelf / rear windowinferred from name

Other location statements (1)
  • Wired into the rear wiring harnessinferred from wiring

Area: Luggage compartment / rear

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Power & Ground

PinWireFunctionConnects toModelsSheets
1/30
ro/bl 1.0 mm²
Battery positive, permanent (terminal 30)derived
S100B7 only387
1/30
sw/bl 1.0 mm²
Battery positive, permanent (terminal 30)derived
S100B6 only952
2/31
br 1.0 mm²
Ground (terminal 31) at 50 (In luggage compartment, left)stated
via 86
B6 and B7387 952
3/87
sw/br 0.5 mm²
J262 Rear Window Shade Control Module: relay switched output (87) to E149 Rear Window Shade Switchderived
E149/6B6 and B7387 952

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.