G513 · Intake Manifold Tuning (IMT) Valve Position Sensor
- Name
- Intake Manifold Tuning (IMT) Valve Position Sensor
- Type
- sensor
- Models
- B7 only
- Diagrams
- 1
Location
Shown in the manual's location figures: 3.2L BKHmanual figure Manual pages 1225, 1229, 1230
Area: Engine
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Module links
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1/+ | bl/ro 0.35 mm² | not stated | J623/63 | B7 only | 580 |
2/S | ge 0.35 mm² | not stated | J623/52 | B7 only | 580 |
3/-- | br/bl 0.35 mm² | not stated | J623/9 | B7 only | 580 |
Diagrams
- 95 · 3.2L - FSI - Injection Engine (188 kW - Motronic - 6 Cylinder) engine codes AUK, BKH B7 · From December 2004
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.