Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G397 · Rain/Light Recognition Sensor

Name
Rain/Light Recognition Sensor
Type
sensor
Models
B7 only
Diagrams
1

Location

Its wires run through T17g (Connector station - left A-pillar)inferred from wiring · 2 wires

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Power & Ground

PinWireFunctionConnects toModelsSheets
1
ro/li 0.5 mm²
Battery positive, permanent (terminal 30a), fused by S17 (10 A, terminal 30)stated
S17/17a
via A1
B7 only434
2
br 0.5 mm²
Ground (terminal 31) at 44 (On left lower A-pillar)stated
via 347
B7 only434
3
li/ge 0.35 mm²
LIN busstated
J519/14
via B528
B7 only434

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.