Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G303 · Radar Interior Monitoring Control Module 1

Name
Radar Interior Monitoring Control Module 1
Type
sensor
Models
B6 and B7
Diagrams
5

Location

Wired into the roof wiring harnessinferred from wiring · 5 of 10 named splices on its wires

Other location statements (1)
  • Its wires run through T17f (Connector station - left A-pillar)inferred from wiring

Area: Roof / headliner

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links & Power

PinWireFunctionConnects toModelsSheets
1
gn/ro 0.22 mm²
K-line (diagnosis)stated
J285/23, J393/14
via A76
B6 and B764 304 476 685 +1
2
ro/gn 0.5 mm²
Battery positive, permanent (terminal 30a), central locking/anti-, theft warning system/IR, fused by S238 (15 A, terminal 30)stated
H12/3, J393/8, S238/38a
via A66
B6 and B764 304 476 685 +1
3
br 0.35 mm²
Ground (terminal 31) at 44 (On left lower A-pillar)stated
via 347
B6 and B764 304 476 685 +1
4
bl 0.35 mm²
not statedJ393/17B6 and B764 304 476 685 +1

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.