Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G219 · Sensor for seatback adjustment, driver seat

Name
Sensor for seatback adjustment, driver seat
Type
sensor
Models
B6 and B7
Diagrams
4

Location

In or under the driver's seatinferred from name

Other location statements (1)
  • Its wires run through T8h (On driver seat, seat backrest)inferred from wiring

Area: Seats

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
3
li 0.35 mm²
not statedJ136/31B6 and B7273 588 644 962
4
ro/ws 0.35 mm²
not statedJ136/3B6 and B7273 588 644 962

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.