Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G · Sender for fuel gauge

Name
Sender for fuel gauge
Type
sensor
Models
B6 and B7
Diagrams
17

Location

Connector at Electrical harness connectormanual text Manual pages 1268, 1270

Other location statements (3)
  • In the instrument cluster (or in the switch it belongs to)inferred from name
  • Wired into the instrument panel wiring harnessinferred from wiring
  • Its wires run through T5d (Near Fuel Pump (FP))inferred from wiring

Area: Instrument panel

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Motors/actuators & Sensors

PinWireFunctionConnects toModelsSheets
2
li/sw 0.35 mm²
not statedJ285/3, J285/11, J538/2B6 and B722 48 112 128 +13
3
br/ge 0.5 mm²
Sensor groundstated
J285/32, F38/1, F66/3, G2/2, G169/3, F66/2, F77/2, F77/3, F66, F77/F77
via 269, 327
B6 and B722 48 112 128 +13
3no colour
Sensor groundstated
F66/3, G2/2
via 269, 327
B6 only128

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.