Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

F4 · Back-Up Light Switch

Name
Back-Up Light Switch
Type
switch
Models
B6 and B7
Diagrams
16

Location

On the transmissioninferred from name

Other location statements (3)
  • Wired into the instrument panel wiring harnessinferred from wiring
  • Its wires run through T17d (Connector station on E-Box)inferred from wiring
  • Shown in the manual's location figures: Manual Transmissionmanual figure p. 1313

Area: Transmission

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Lighting & Module links

PinWireFunctionConnects toModelsSheets
1
bl/ro 0.35 mm²
not statedJ393/7B7 only477 687
2
bl/ro 1.0 mm²
Reversing lights (RF)stated
J393/7, Y7/3, J402/17, J519/30, M16/1/RF, M17/5/RF
via A87
B6 and B765 234 305 346 +5
3
sw/bl 1.5 mm²
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)derived
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)stated
S231/31a, Y7/1, G70, J519/18
via A70, D51
B6 and B721 47 190 216 +5
21
bl/ro 1.0 mm²
Reversing lights (RF)stated
J393/7, M16/3/RF, M17/3/RF
via A87
B6 and B721 47 190 216 +1

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.