Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

F243 · Adjusting element for central locking (safe), driver door

Name
Adjusting element for central locking (safe), driver door
Type
switch
Models
B6 and B7
Diagrams
7

Location

In the driver's doorinferred from name

Other location statements (1)
  • Shown in the manual's location figures: Door Locksmanual figure p. 1323

Area: Driver's door

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
7
li/ge 0.35 mm²
not statedJ386/2B7 only487 697
8
br 0.35 mm²
not statedJ386/9B7 only487 697
KL.31
br 0.35 mm²
Ground (terminal 31)derived
J386/9B6 only73 315 828 905 +1
safe
li/ge 0.35 mm²
not statedJ386/2B6 only73 315 828 905 +1

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.