E579 · Daytime Running Light disable switch
- Name
- Daytime Running Light disable switch
- Type
- switch
- Models
- B7 only
- Diagrams
- 2
Location
Wired into the instrument panel wiring harnessinferred from wiring · 2 of 4 named splices on its wires
Area: Instrument panel
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Module links & Ground
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
3 | bl/ro 0.5 mm² | Vertical Headlight Adjustmentstated | J519/30 | B7 only | 465 472 |
5/31 | br 0.35 mm² | Ground (terminal 31) at 33 (Behind instrument panel, right)stated | via 238 | B7 only | 465 472 |
8/58S | gr/bl 0.35 mm² | Dimmed switch illumination (terminal 58s)stated | E1/17/58d, J285/17via A175 | B7 only | 465 472 |
Diagrams
- 63 · Headlights with High Intensity Gas Discharge (HID) "Bi-Xenon" lamps and Automatic Headlight Beam Adjusting B7 · From November 2004
- 64 · Headlights with High Intensity Gas Discharge (HID) "Bi-Xenon" lamps, Cornering Light and Automatic Headlight Beam B7 · From November 2004
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.