Security systems
Stub. How the immobiliser, remote key and central locking and alarm fit together as far as the repo's sources say, and the limits on what is written up here.
What this page will cover
Section titled “What this page will cover”The security-related parts of the car as one system: the immobiliser that recognises the key, the remote key and its receiver, the central locking and the alarm, and the messages that tie them together.
What the sources in this repo already say
Section titled “What the sources in this repo already say”- The cluster J285 contains the immobiliser (SSP 254 calls it immobiliser III on the B6 launch car). It reads the key through the coil D2 and exchanges data with J393 over the convenience CAN (Instrument cluster).
- J393 runs central locking and the alarm. Radio remote control is standard; its aerial is R47 (Convenience system and anti-theft alarm).
- The alarm triggers if the key used is not known to the immobiliser, so the three systems are linked (Convenience system and anti-theft alarm).
The pages:
Open questions
Section titled “Open questions”- Which messages pass between the cluster and J393, and in which direction?
- Which of these systems differ between B6 and B7 beyond the immobiliser generation?
- Which parts of the security chain can be understood from the module’s outside (bus traffic) without any need to describe how it could be defeated?
How to capture or measure it
Section titled “How to capture or measure it”Passive observation on the convenience CAN, with the ignition in known states, is the starting point: see Convenience CAN messages. Use read-only VCDS measuring blocks where they exist. Do not transmit on a live bus unless you know what the message does.
Related
Section titled “Related”Parts in the wiring data
| Code | Name | Models | Location |
|---|---|---|---|
J285 | Control module with indicator unit in instrument panel insert | B6 and B7 | Behind display unit |
J393 | Central control module for comfort system | B6 and B7 | At sill panel, front left |
D2 | Induction Coil of Anti-theft Immobilizer | B6 and B7 | Steering column, around the ignition lock |
R47 | Central Locking and Anti-theft Alarm System Antenna | B6 and B7 | Routed from the Comfort System Central Control Module -J393- |
Sources
- SSP 254 – Audi A4 '01 Technical Features — Audi AGImmobiliser III in the cluster, the convenience system and the alarm.