G28 · Engine Speed (RPM) Sensor
- Name
- Engine Speed (RPM) Sensor
- Type
- sensor
- Models
- B7 only
- Diagrams
- 3
Location
In gear case above ring gearmanual text Manual pages 1215 · 3.0L AVK and BGN
Other location statements (4)
Area: Transmission
Part numbers
From the parts catalogue, tied to G28 by tools/link_parts_wiring.py. The badge says on what grounds: name the names agree and the row is filed where the part sits; possible only a candidate, not a statement. Check the number against your chassis number before ordering.
Possible, not confirmed
| Part number | Name in the catalogue | Illustration | Qty | Applies to | Basis |
|---|---|---|---|---|---|
8E0 927 803 Bother suffixes: 8E0 927 803 A | speed sensor | A4 B7 927-000 item 1 | 2 | possible "speed sensor" against "Engine Speed (RPM) Sensor": the component name adds "engine" | |
8E0 927 807 G | speed sensor | A4 B7 927-000 item 12 | 2 | PR:8Q0,8Q1 | possible "speed sensor" against "Engine Speed (RPM) Sensor": the component name adds "engine" |
8E0 927 807 G | speed sensor right | A4 B7 927-000 item (12) | 1 | PR:8Q3,8Q5 | possible "speed sensor" against "Engine Speed (RPM) Sensor": the component name adds "engine" |
8E0 927 807 F | speed sensor left | A4 B7 927-000 item 13 | 1 | PR:8Q3,8Q5 | possible "speed sensor" against "Engine Speed (RPM) Sensor": the component name adds "engine" |
01V 927 321other suffixes: 01V 927 321 B | Gearbox speed sender G38/G195 | A4 B7 927-055 item 6 | 1 | Quattro+; 5-speed; automatic+; GBH | possible "Gearbox speed sender" against "Engine Speed (RPM) Sensor": the component name adds "engine" |
01V 927 321 Bother suffixes: 01V 927 321 | Gearbox speed sender G182 | A4 B7 927-055 item 9 | 1 | Quattro+; 5-speed; automatic+; GBH | possible "Gearbox speed sender" against "Engine Speed (RPM) Sensor": the component name adds "engine" |
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Module links
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | bl 0.35 mm² | not stated | J623/53 | B7 only | 573 |
2 | gr 0.35 mm² | not stated | J623/38 | B7 only | 573 |
1/+ | sw/ws 0.35 mm² | 5 V sensor supplystated | G247/3/+, G336/1/+, G40/1/+, J623/26via D174 | B7 only | 610 807 |
2/S | gr 0.35 mm² | not stated | J623/36, J624/36via D112 | B7 only | 610 807 |
3/-- | bl 0.35 mm² | not stated | J623/51 | B7 only | 610 807 |
Diagrams
- 95 · 3.2L - FSI - Injection Engine (188 kW - Motronic - 6 Cylinder) engine codes AUK, BKH B7 · From December 2004
- 102 · 4,2 l - FSI - Injection Engine (309 kW - Motronic - cylinder 8) engine code BNS B7 · From 2006 m. y.
- 128 · 4,2 l - FSI - Injection Engine (309 kW - Motronic - cylinder 8) engine code BNS B7 · From 2007 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.