Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

F125 · Multi-Function Transmission Range (TR) Switch

Name
Multi-Function Transmission Range (TR) Switch
Type
switch
Models
B6 only
Diagrams
1

Location

On the left side of the transmissionmanual text Manual pages 1302

Other location statements (1)
  • In the steering wheel / steering columninferred from name

Area: Transmission

Part numbers

From the parts catalogue, tied to F125 by tools/link_parts_wiring.py. The badge says on what grounds: name the names agree and the row is filed where the part sits; possible only a candidate, not a statement. Check the number against your chassis number before ordering.

Possible, not confirmed

Part numberName in the catalogueIllustrationQtyApplies toBasis
01V 919 821 Bmulti-function switch for; automatic gearbox; * Note technical; * product information
10 pin
A4 B6 927-055 item 31possible
"multi-function switch for" against "Multi-Function Transmission Range (TR) Switch": the component name adds "range transmission"

Named in the catalogue, number not loaded yet

  • A4 B6 321-070 item 12: “multi-function switch for”, see illustration 927-055 possible
    "multi-function switch for" against "Multi-Function Transmission Range (TR) Switch": the component name adds "range transmission". Illustration 927-055 is not in the loaded part of the catalogue.

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Ground & Power

PinWireFunctionConnects toModelsSheets
10/31
br 0.5 mm²
Ground (terminal 31) at 12 (In engine compartment, left)stated
via 83
B6 only251
7/B
sw/bl 1.5 mm²
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)derived
N110/2, S231/31a
via A70
B6 only251
8/R
bl/ro 1.0 mm²
Reversing lights (RF)stated
via A87
B6 only251

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.