Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Page 879 · Control module with indicator unit in instrument panel insert, Oil Pressure Switch, Oil Level Thermal Sensor, Fuel Pump (FP)

197198199200201202203204205206207208209210green/yellow 2.5 mm²: track 25 (p. 866) to G6 pin 12.5 gn/ge1brown 2.5 mm²: G6 pin 4 to ground 2492.5 br4green/red 0.22 mm²: joint to J285 pin T32a/230.22 gn/roT32a/23lilac/black 0.35 mm²: J285 pin T32/3 to G pin 20.35 li/swT32/32brown/yellow 0.5 mm²: G pin 3 to ground 2690.5 br/ge3orange/black 0.35 mm²: joint to J285 pin T32a/130.35 or/sw13blue/yellow 0.35 mm²: J285 pin T32/2 to track 81 (p. 870)0.35 bl/ge0.35 bl/ge2orange/brown 0.35 mm²: joint to J285 pin T32a/120.35 or/br12white/grey 0.35 mm²: J285 pin T32a/16 to F1 pin ?0.35 ws/gr0.35 ws/gr16blue/brown 0.35 mm²: track 83 (p. 870) to J285 pin T32/40.35 bl/br4red/grey 0.35 mm²: J285 pin T32/23 to G266 (guess) pin 30.35 ro/gr0.35 ro/gr233?black/red 1.0 / 0.5 mm²: splice A74 to G266 (guess) pin 11.0 sw/ro0.5 sw/ro1?black/red 1.0 mm²: track 22 (p. 866) to splice A74brown 0.5 mm²: G266 (guess) pin 2 to ground 830.5 br2?black 0.35 mm²: track 24 (p. 866) to J285 pin T32a/30.35 sw3blue 0.35 mm²: splice A17 to track 12 (p. 865)0.35 bl0.35 blblue 0.35 mm²: J285 pin T32a/14 to splice A170.35 bl142492492692698383A17A17A74A74Inline connector T10 pin 3T10/3Inline connector T10 pin 7T10/7Inline connector T10 pin 1T10/1Inline connector T10a pin 2T10a/2Inline connector T10a pin 9T10a/9Inline connector T10 pin 9T10/9Continues at track 83, page 87083Continues at track 24, page 86624Continues at track 25, page 86625Continues at track 12, page 86512Continues at track 81, page 87081Continues at track 22, page 86622Rail e continues on page 878eRail d continues on page 878dRail c continues on page 878cG · Sender for fuel gaugeGF1 · Oil Pressure SwitchF1G6 · Fuel Pump (FP)G6G266 · Oil Level Thermal SensorG266J285 · Control module with indicator unit in instrument panel insertJ285K2 · Generator (GEN) Warning LightK2

Point at or tap a wire to see the whole circuit on this sheet; tap again to open it.

  • wire in its colours (ro/sw)
  • part guessed from its position
  • end not resolved
  • continues at that track
  • splice or ground point
  • inline connector

Drawn by this site from the positions and wiring data extracted from the manual. Pinch, Ctrl+scroll or the buttons zoom; drag to move once zoomed.

What this drawing does not show:

  • what is inside a part: fuse elements, relay contacts, switches, bulbs, motors and the lines inside modules (a part is a box, or only its code);
  • the asterisks that mark variant wires (a wire tied to sedan or Avant says so when tapped, and is faded for the other body);
  • the shields of coaxial cables, and the sheet's notes and terminal names;
  • fuse ratings other than those the fuse list states for that code.
  • 2 of 23 gauge and colour labels, where there was no room on the wire: tap the wire for them.

3 pins with a guessed part. Manual page: p. 879